 |
|
|
 首页 |
名片设计 CorelDRAW Illustrator AuotoCAD Painter 其他软件 Photoshop Fireworks Flash |
|
Author: zhuam 昨晚一口气看完了夏昕写的<<Webwork2_Guide>>,虽然文档资料很简洁,但仍不失为一本好的WebWork2书籍,看的出作者的经验和能力都是异常的老道,在此向作者的开源精神致敬,并在此引用夏昕的那句话So many open source projects, Why not Open your Documents? 今天下载了最新的WebWork2版本, 开始了源码分析,这份文档只能算是我的个人笔记,也没时间细细校对,且个人能力有限,难免有许多分析错误或笔误的地方,还望各位指正. WebWork1.x版本是采用紧偶合的架构,类似如Struts ,而WebWork2.x版本后采用了新的架构 WebWork2.x+XWork1.x 就是因为他采用了这样架构所以才吸引我去看他源码的啊!新的架构分离了与Servlet API的紧偶合,这样我们的系统结构将更加的清楚,且系统测试与系统移植将来的更加方便,其实WebWork1.x版本我也没有看过,所谓的紧偶合也是看网上是这么说的,没有发言权啊,呵呵! 在新的架构中WebWork2.x的作用是负责将用户的HTTP哀求分离出来,使的哀求完全的脱离Servlet API,然后将这些哀求用Map的方法传入XWork1.x,且XWork1.x通过Interceptor 将Map 中的数据传到我们的VO中,然后由对应的自定义Action来调用. 下面首先来看WebWork2.x怎么分离HTTP哀求,其实他是通过ServletDispatcher来达到目的.代码如下所示: public static HashMap createContextMap(Map requestMap, Map parameterMap, Map sessionMap, Map applicationMap, HttpServletRequest request, HttpServletResponse response, ServletConfig servletConfig) { HashMap extraContext = new HashMap(); //存放HTTP中上传文件的request session哀求 extraContext.put(ActionContext.PARAMETERS, parameterMap); extraContext.put(ActionContext.SESSION, sessionMap); extraContext.put(ActionContext.APPLICATION, applicationMap); extraContext.put(ActionContext.LOCALE, (locale == null) ? request.getLocale() : locale); extraContext.put(HTTP_REQUEST, request); extraContext.put(HTTP_RESPONSE, response); extraContext.put(SERVLET_CONFIG, servletConfig); extraContext.put(ComponentInterceptor.COMPONENT_MANAGER, request.getAttribute(ComponentManager.COMPONENT_MANAGER_KEY)); // helpers to get access to request/session/application scope //这里用于存放HTTP中的request session哀求 extraContext.put("request", requestMap); extraContext.put("session", sessionMap); extraContext.put("application", applicationMap); extraContext.put("parameters", parameterMap); AttributeMap attrMap = new AttributeMap(extraContext); extraContext.put("attr", attrMap); return extraContext; } 以上的是ServletDispatcher 中的方式createContextMap是用于将HTTP哀求封装到Map中去,且ServletDispatcher也是WebWork2.x的控制器,负责分离出Action, 他是通过service方式去调用serviceAction方式,然后由serviceAction来完成操作的,代码如下: public void serviceAction(HttpServletRequest request, HttpServletResponse response, String namespace, String actionName, Map requestMap, Map parameterMap, Map sessionMap, Map applicationMap) { HashMap extraContext = createContextMap(requestMap, parameterMap, sessionMap, applicationMap, request, response, getServletConfig()); //实例化Map哀求 extraContext.put(SERVLET_DISPATCHER, this); // If there was a previous value stack, then create a new copy and pass it in to be used by the new Action OgnlValueStack stack = (OgnlValueStack) request.getAttribute(ServletActionContext.WEBWORK_VALUESTACK_KEY); if (stack != null) { extraContext.put(ActionContext.VALUE_STACK,new OgnlValueStack(stack)); } try { ActionProxy proxy = ActionProxyFactory.getFactory().createActionProxy(namespace, actionName, extraContext); //这里actionName是通过两道getActionName解析出来的,下面是ServletDispatcher的 TODO: QUESTIONS转载出来让大家看一看 * 1) What unit is maxSize of attachments in? (assuming bytes for now) * 2) Isn\\\'t error message wrong in catch of try/catch in service() method? * 3) Why is getActionName(String) not declared public? (The fix would not be an API addition so this could be ( done for pre 2.1) * 4) Why does createContextMap(...) return a HashMap and not a Map? (2.1 api change) * 5) Why doesn\\\'t getNameSpace(request) get the servlet path in the same way that getActionName(request) does? * 6) Why does getParameterMap throw an IOException? Can\\\'t see a reason for that. (2.1 api change) */ request.setAttribute(ServletActionContext.WEBWORK_VALUESTACK_KEY, proxy.getInvocation().getStack()); proxy.execute(); // If there was a previous value stack then set it back onto the request if (stack != null){ request.setAttribute(ServletActionContext.WEBWORK_VALUESTACK_KEY,stack); } } catch (ConfigurationException e) { log.error("Could not find action", e); sendError(request, response, HttpServletResponse.SC_NOT_FOUND, e); } catch (Exception e) { log.error("Could not execute action", e); sendError(request, response, HttpServletResponse.SC_INTERNAL_SERVER_ERROR, e); } } 返回类别: 教程 上一教程: java学习日记(线程) 下一教程: int 和 String 互相转变的多种方式 (转) 您可以阅读与"WebWork2源码分析"相关的教程: · WebWork2源码分析续三 · WebWork2源码分析续一 · WebWork2源码分析续二 · Java源码分析：深入探讨Iterator模式 · Java源码分析：深入探讨Iterator模式 |
  |
| 快精灵印艺坊 版权所有 |
首页 会员中心在线印刷在线编辑付款方式索取样品设计指南连锁门店
|
||
